BLE GATT Serial adapters for transparent data trannsmision applications:
1. Support BLE GATT service for data transmission
1.1 V1: BLE V5.0, 4 dBm, w/o odd parity, one to one, Low cost
1.2 V2: BLE V5.2, 6 dBm, support "one central link many peripherals" or "many centrals link one peripheral", Customized UUID to link with 3rd party's periperal
1.3 Dual: SPP + BLE V4.2, 9 dBm
1.4 Long range: BLE V5.3, 20 dBm, supports long range (Coded PHY), Supports "many centrals link one peripheral" for CNC data transmission
2. Serial port interface options: RS-232, RS-422 or RS-485 (Modbus). CANBus will be customized
3. Connector type: Male DB9. The terminal block or M12 will be customized
4. Antenna Gain options: 2.0 dBi (External dipole), 3.64 dBi (Internal Chip) or 4.52 dBi (Long External)
5. Plastic casing options: with or w/o fixing hole base or waterproof. (DIN type is with the hole)
6. Power input options: 5~40 VDC from Pin9 of DB9, 2P Terminal block or USB. 5VDC for the Rechargeable battery type 7. Common Specifications:
* Baud Rate: Supports 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4/460.8/921.6 Kbps
* Signal: TxD, RxD, GND, CTS/RTS (RS-232) A, B, Z, Y, GND, VCC (RS-422/485)
* Data Bit: 8 bits
* Frequency: 2.400 to 2.4835 GHz
* Tx. Power: Max. 6 dBm, Long range: 20 dBm
* Rx. Sensitivity: -106.7 dBm @ 125Kbps GFSK
* Current Consumption: 8.2 mA TX current @ 6 dBm output power
* Operation Temperature: -20 to +75 Centigrade Degrees
* Dimensions: 90 mm (L) x 35 mm (W) x 18 mm (H) (Internal antenna type)
* External antenna length: 88mm w/o foldable SMA connector(20mm)
8. Options: NUT type DB9, Male to Male gender changer, Female to Female gender changer, DB9 to 6P Terminal block Remark: All contents are subject to change without notice.
Package Contents:
1. BLE RS-232 or RS-422/485 Adapter x 1 pc
2. Power cable x 1: w/o DIN type is USB Mini to Type A with DIN type is USB Type C to A
3. External antenna: w/o DIN type is 2 dBi, 4.52 dBi is optional with DIN type is 4.52 dBi.
4. A4 User manual x 1 pc5. DB9 to 6P Terminal block (inside the standard package for RS-422/485 type, optional is for RS-232 type)
Customized service:
1. Hardware: PCBA or Casing
2. Default setting: Device name, Baud rate, Parity, Stop bit, Flow control, Data bit, ...
3. Color of the case, Label, Logo, Printing, ...
If you need any information, please don't hesitate to contact us.
sales@uconnect.com.tw
